Review on Astro EUROHV109 EuorPro Forged HVLP Spray Gun - 1.9mm Nozzle & Plastic Cup: Superior Spray Performance by Jeb Moorehead

I bought this to replace my Eastwood low CFM spray gun, thinking it would be the sweet spot between HF guns and big bucks. My main issue with the EW gun was that the fan height is below average. This one creates a nice full 8-10" fan when it's 8" from the piece (compared to Eastwood which is more like a 5" fan) and you don't have to crawl to knock the stuff off. I using this with a 60 gallon compressor with the outlet regulator set at 80psi and I have a small 10 foot regulator available on Amazon that mounts to the gun which is set at about 22psi. Pressure at 29psi I also immediately upgraded the mug to Amazon's 1000ml Titanium Aluminum mug (you will also need an additional "Import Gun" adapter) With all these parts you get a very good one Spray gun I've used this for spraying 2K urethane primer and one step enamel so far.I have yet to find out if this 1.5mm tip works well with a clear coat.